Windows 7 64 bit

Posted: Tue Aug 02, 2016 2:00 pm Post subject: Windows 7 64 bit

Rebuilding my pc storage structure, putting in 16GB of G.Skill, and upgrading to 64 bit hopefully this week. Any pointers?

Posted: Fri Aug 12, 2016 8:06 pm Post subject: Re: Windows 7 64 bit

I didn't have any pointers when you initially posted this, but I thought I'd check in and see how it's going. Made the jump yet?

Posted: Sat Aug 13, 2016 12:53 pm Post subject: Re: Windows 7 64 bit

Yeah running now. 6 years of stuff is a lot of work to organize and reinstall, though. I'm battling some kind of boot error now that windows is on an ssd. Runs great once it starts after three or four attempts in the morning.

Posted: Mon Aug 15, 2016 10:15 pm Post subject: Re: Windows 7 64 bit

is achi turned on

Posted: Tue Aug 16, 2016 7:26 am Post subject: Re: Windows 7 64 bit

Posted: Thu Sep 01, 2016 7:07 pm Post subject: Re: Windows 7 64 bit

hmmm

maybe a bad stick of memory or bad slot?? have you run memtest on them? tried re-seating them, tried like 1 stick in 1 slot, etc.

how's your psu?

made sure all power connections plugged in good? cpu and heatsink seated good? maybe you hit the heatsink, loosened it while building and it's overheating?

reseat vid card.

Posted: Fri Sep 02, 2016 3:14 am Post subject: Re: Windows 7 64 bit

Kenny's suggestions are all things worth double-checking.

I would also throw into the mix that this reminds me of a problem I had a few years ago which was due to a corrupt setting in my bios. Basically, the bios setting was causing an incorrect voltage to the graphics card, and the PSU would auto-trip-off. On the second or third auto-power-off the bios was detecting the error and then running correctly (presumably with safe-default-bios-settings or something). But reverting to the incorrect setting after being switched off overnight, causing the same hoopla the next day.

So, to rule out voltage/current issues:
1.) Check that your bios is listing the correct SSD model and GFX card model.
2.) Make sure the bios-battery (if your board has one) is not loose.
3.) Re-flash/upgrade your bios rom.
4.) If your bios rom is already flashed up to date then try resetting the bios to factory default settings.
5.) Make sure the PSU itself isn't clogged with dust.

Failing all of that, take PSU to hardware store/electrician/pal-with-a-volt-meter and get them to check it actually delivers the voltage and current it is rated for. (And if it doesn't, the manufacturer should replace it as faulty hardware.)

Posted: Fri Sep 02, 2016 11:28 pm Post subject: Re: Windows 7 64 bit

gimp, is it in a reboot loop? any error message? is this during the install or after?

Posted: Sat Sep 03, 2016 10:22 am Post subject: Re: Windows 7 64 bit

All good suggestions. I'm out of town right now but I'll expound when I get home. Weird thing is once it starts properly it will restart perfectly the rest of the day and runs flawlessly.

Posted: Mon Sep 05, 2016 3:01 am Post subject: Re: Windows 7 64 bit

Maybe it's just taking a little while to get to it's ideal working temperature from a cold-boot-up in the morning. Re-check your air-flow and dust situation (and as per my previous post: Bios, Voltages & currents).

Posted: Wed Sep 07, 2016 1:17 am Post subject: Re: Windows 7 64 bit

Error like this? "Boot Mgr not found. Press Ctrl+Alt+Del." I get that after an initial restart. I usually boot into bios and "exit and restart" from there. Seeing as a bios reboot works 100% of the time I'm not worried about it. I have quite a few drives with a lot of files and I'm lazy, so I just live with it lol.

What I'd try is:
Remove all storage devices, except the boot drive, and see what happens.

Posted: Sun Dec 11, 2016 8:51 pm Post subject: Re: Windows 7 64 bit

Eventually, the LAN port died and I replace the MB and it's all good. Might have been a spike or just age, but it was only 7 years old so...idk